High Energy Precision Wirewound Resistors (KNP-R) meeting MIL-R-26E

(KNP-R) High Energy Precision Wirewounds - Introduction

Power Wire Wound Resistors Boast Consistent Precision Power Operation

< >
  • Precision Wirewound High-Energy Resistors meeting MIL-R-26E (KNP-R)
  • High Energy Wirewound Precision Resistors (KNP-R)
  • High Energy Precision Wirewound Resistors (KNP-R)
  • Precision Wirewound High Energy Resistors (KNP-R)

Token’s highest quality conformal axial terminal ceramic-silicone coated KNP-R power resistors for applications requiring high stability and precision. The KNP-R wire-wound has a low temperature coefficient and maintain a high degree of stability under demanding conditions.

The power precision KNP-R series meeting MIL-R-26E (U and V characteristics) and surface temperature (hot spot) 375°C max. Resistors with a wide range of 0.01Ω ~ 82kΩ, covering applications from precision to power. Products with lead-free terminations meet EU RoHS and China RoHS requirements.

Characteristics U :
  • 275°C Maximum hot spot temperature. 1% Maximum ΔR in 1000 hours load life.
Characteristics V :
  • 375°C Maximum hot spot temperature. 3% Maximum ΔR in 1000 hours load life.

Operating temperature range is -55°C ~ +375°C and derated power at high ambient temperatures as according to the chart below. Token is equipped to design and produce custom components to meet many design and reliability demands. In addition to standard military-grade resistor products, we also have many resistive products designed to meet various source-controlled drawings.

Contact us with your specific needs.

Download complete PDF High Energy Precision Wirewound Resistors (KNP-R).

Features :
  • Excellent load life stability
  • High Precision and reliability
  • Axial ceramic-silicone coated
  • Meets the Standards of MIL-R-26E
  • RoHS compliant with 100% lead free
Applications :
  • Medical instrumentation and Medical implantables
  • Bias supply, Voltage divider networks, Radar, Ground Vehicles
  • Motor speed controls, Current shunts, Voltage dropping, Communications systems

(KNP-R) Technical Specifications & Dimensions

MIL Precision Wirewound Resistors (KNP-R) Power Derating Curve
MIL Precision Wirewound Resistors
(KNP-R) Power Derating Curve
Power Precision Wirewound Resistor (KNP-R) Dimensions
Precision Wirewound Power Resistor
(KNP-R) MIL-R-26E Dimensions
Type MIL - R-26E Power Rating (W) Max. Working Voltage (V) Resistance Range (Ω) Dimensions (Unit: mm)
U (275°C) V (375°C) U (275°C) V (375°C) 0.1% 0.25% 0.5% 1% 2% 3% 5% L±0.81 D±0.81 d±0.1
KNP-R1/4 - 0.40 - 20 - 10~950 1~3.4K 6.35 1.98 0.51
KNP-R1/2 RW70 0.75 - 29 - 10~1.3K 1~4.9K 7.92 1.98 0.51
KNP-R1A - 1.00 - 53 - 1~2.7K 0.1~10.4K 10.31 2.36 0.64
KNP-R1 RW69 1.10 - 62 - 1~4.0K 0.1~15K 13.49 2.36 0.64
KNP-R2A - 2.50 3.25 138 157 1~8.6K 0.01~32.3K 12.70 5.33 0.81
KNP-R2 RW79 3.00 3.75 135 148 1~5K 0.01~2K 13.49 4.06 0.81
KNP-R3A - 3.00 3.75 135 148 1~6.5K 0.01~34.5K 14.27 5.33 0.81
KNP-R3 - 3.25 4.75 185 220 1~11.4K 0.01~42.1K 20.62 5.33 1.02
KNP-R4 RW67 4.00 5.50 210 250 1~12.7K 0.01~47.1K 15.88 7.62 1.02
KNP-R5 RW74 5.00 6.50 330 376 0.5~24.5K 0.01~51K 22.22 7.62 1.02
KNP-R7 RW68 7.00 9.00 504 576 0.5~41.4K 0.01~75K 30.94 9.52 1.02
KNP-R10 RW78 10.00 13.00 799 911 0.5~71.3K 0.01~82K 45.21 9.52 1.02
  • Temperature Coefficient: 1Ω and below ± 150 ppm/°C, 1Ω to 9.9Ω ± 100 ppm/°C, 10Ω and above ± 100 ppm/°C, (50 ppm/°C on request).

(KNP-R) Electrical Performance

Test Items Test Method Specifications
Short Time Overload 2.5 times of rated voltage 5 sec. ΔR±(2%+0.05Ω)
Rated Load Rated wattage 30 minutes. ΔR±(1%+0.05Ω)
Voltage Withstanding 500VAC 1 minute. ΔR±(1%+0.05Ω)
Insulation Resistance 500V 20MΩ
Temp. Cycle -20°C ~ 85°C 5 cycles ΔR±(1%+0.05Ω)
Soldering After Resistance 235°C for 3 sec ΔR±(0.5%+0.05Ω)
Incombustibility 16 times of rated wattage for 5 min. Not flamed
Load Life +25°C, 1.5Hrs on ~ 0.5Hrs off cycle, 1000 Hrs. U: ΔR±(1%+0.05Ω)
V: ΔR±(3%+0.05Ω)

(KNP-R) Application Notes of Wirewounds

  1. When being used in AC circuits, some wirewound structures give inductance ingredients or parasitic capacity, so they may cause unusual phenomena such as oscillations etc. Quorum deviations of other components should be carefully taken into account for use.

  2. Application and Placement: Wirewound resistors use different gauges of wire as resistance elements. Sometimes the gauge is extremely thin (finer than a strand of human hair) and very susceptible to breakage in environments containing salts, ash, dust and corrosives. Avoid utilization in such environments.

  3. Do not install in dusty areas because the accumulation will cause shorts and poor conductance.

(KNP-R) Order Codes

KNP-R3A U 100R B P
1 2 3 4 5
Part Number
KNP-R
Characteristic (°C)
U 275°C
V 375°C
Resistance Value (Ω)
0R1 1.0Ω
1R
100R 100Ω
1K 1000Ω
Resistance Tolerance (%)
B ±0.1%
C ±0.25%
D ±0.5%
F ±1%
G ±2%
H ±3%
J ±5%
Package
P Bulk
TB Taping Box