Rib-Wound Power Non-Inductive Resistors (DQ*N)

Goto Next Page: 2 / 2

Non-Inductive Rib-Wound Power Resistors (DQ*N) Introduction

Rib-Wound Power Non-Inductive Resistor (DQ*N)
Applies Ayrton Perry winding method to compensate residual inductance and to allow for efficient heat dissipation at higher temperature ranges, so the resistor is half the physical size of an equivalent rated round wire wound DR resistors.

Non-Inductance :
Ayrton Perry non-inductive winding is applied. When required add "N" to the part number.

Resistance Tolerance :
K(±10%), J(±5%), H(±3%)

The power DQ*N wave-ribbon resistor is lead-free and RoHS compliant. Please contact us for details with your specific needs.

Dimensions (DQAN 75W ~ 2000W)

(DQAN) No mount
(DQAN) N - No Mount
(DQAN) Horizontal mount
(DQAN) G - Horizontal Mount
Wattage
Rating
Dimensions (Unit: mm) Resistance
Range
A B C D E F G H I J K L M O
75W 110 25 16 30 8 150 5 18 6 166 58 1.2 6 27 1.5~8Ω
90W 90 28 18 32 8 130 5 19 6 146 60 1.2 6 27 1.5~9Ω
120W 110 28 18 32 8 150 5 19 6 166 60 1.2 6 27 2~12Ω
150W 140 28 18 32 8 180 5 19 6 196 60 1.2 6 27 2~15Ω
180W 160 28 18 32 8 200 5 19 6 216 60 1.2 6 27 3~18Ω
225W 195 28 18 32 8 235 5 19 6 251 60 1.2 6 27 3~23Ω
240W 185 35 24 36 10 225 5 19 8 245 76 1.6 6 34 5~24Ω
300W 210 35 24 36 10 250 5 19 8 274 76 1.6 6 34 5~30Ω
375W 210 40 25 38 12 250 5 20 8 274 78 1.6 6 34 6~38Ω
450W 260 40 25 38 12 300 5 20 8 320 78 1.6 6 34 6~45Ω
600W 330 40 25 38 12 370 5 20 8 395 78 1.6 6 34 7~60Ω
750W 330 50 35 50 12 380 6 25 9 400 100 1.6 8 40 8~75Ω
900W 400 50 35 50 12 450 6 25 9 470 100 1.6 8 40 8~90Ω
1000W 460 50 35 50 12 510 6 25 9 530 100 1.6 8 40 12~100Ω
1200W 460 60 40 55 15 515 6 30 10 535 110 1.6 10 50 12~120Ω
1500W 540 60 40 55 15 595 6 30 10 615 110 1.6 10 50 15~150Ω
2000W 650 65 42 62 15 702 6 30 10 722 115 1.6 10 50 15~200Ω

Dimensions (DQBN 30W ~ 20000W)

(DQBN) No mount
(DQBN) N - No Mount
(DQBN) Vertical mount
(DQBN) Z - Vertical Mount
(DQBN) Horizontal mount
(DQBN) G - Horizontal Mount
Wattage
Rating
Dimensions (Unit: mm) Resistance
Range
R L1 L2 L3 H N d M q Q
30W 20 70 100 120 50 6 3.5 5 5 20 2~1KΩ
40W 20 87 115 137 50 6 3.5 5 5 20 2~1KΩ
50W 28 90 115 143 68 9 4.5 5.5 6 27 5~1KΩ
80W 28 90 115 143 68 9 4.5 5.5 6 27 5~2KΩ
100W 28 170 195 223 68 9 4.5 5.5 6 27 10~3KΩ
150W 28 215 240 268 68 9 4.5 5.5 6 27 10~3KΩ
200W 28 267 292 320 68 9 4.5 5.5 6 27 10~5KΩ
250W 28 267 292 320 68 9 4.5 5.5 6 27 10~5KΩ
300W 40 267 300 343 90 10 4.5 6 6 39 20~5KΩ
400W 40 330 365 406 90 10 4.5 6 6 39 20~5KΩ
500W 50 330 365 415 98 10 6 8.5 8 49 20~5KΩ
600W 50 330 365 415 98 10 6 8.5 8 49 20~5KΩ
700W 50 400 435 485 95 10 6 8.5 8 49 20~5KΩ
800W 70 300 320 362 138 15 8 - 8 69 40~500Ω
1000W 70 300 320 362 138 15 8 - 8 69 40~500Ω
1500W 70 415 435 477 138 15 8 - 8 69 40~500Ω
2000W 70 510 530 572 138 15 8 - 8 69 40~500Ω
2500W 70 600 620 662 138 15 8 - 8 69 40~500Ω
3000W 70 600 620 662 138 18 8 - 8 69 40~500Ω
4000W 100 430 450 521 155 15 8 - 8 99 40~500Ω
5000W 100 500 620 691 155 15 8 - 8 99 40~500Ω
6000W 100 600 720 791 155 15 8 - 8 99 40~500Ω
10000W 150 600 625 720 350 30 8 - 10 150 40~500Ω
12000W 150 660 685 780 350 30 8 - 10 150 40~500Ω
15000W 150 660 685 780 350 30 8 - 10 150 40~500Ω
20000W 150 1000 1030 1120 350 30 8 - 10 150 40~500Ω

Specifications (DQ)

Test Item Test Methods Characteristics
Resistance tolerance JIS-C-5202 5-1 Resistance Nominal Tolerance
1≤R 1>R ±5%(J) ±10%(K)
Temperature coefficient JIS-C-5202 5-2 ±400PPM/°C MAX
Load rating JIS-C-5202 5-4 ΔR/R≤ ±(0.5%+0.1Ω) Surface temperature up 350°C MAX
Short-term overload JIS-C-5202 5-5
500% rated wattage 5 seconds
Free of appearance or structural irregularity ΔR/R≤ ±(2%+0.1Ω)
Insulation resistance JIS-C-5202 5-6 500VDC 100MΩ min
Dielectric withstanding voltage JIS-C-5202 5-7
1000VDC 1 minute Between terminal and anchor stand
Free of appearance or structural irregularity ΔR/R≤ ±(0.1%+0.05Ω)
Terminal strength JIS-C-5202 6-1 8kg 30 seconds Free of appearance or structural irregularity
Vibration JIS-C-5202 6-3
1.5m/m 10 ~ 50 ~ 10 Hz/min X-Y-Z 2 hours each
Free of appearance or structural irregularity Surface coating crack ΔR/R≤ ±(1%+0.05Ω)
Thermal shock JIS-C-5202 7-3
Room temp 30 minutes ON-55°C 15 minutes OFF
Free of structural irregularity ΔR/R≤ ±(1%+0.05Ω)
Humidity JIS-C-5202 7-5
40°C 90%RH 240 hours
Free of appearance or structural irregularity Surface coating crack ΔR/R≤ ±(3%+0.1Ω)
Load life JIS-C-5202 7-10
90 minutes ON - 30 minutes OFF500 hours
Free of appearance or structural irregularity Surface coating crack ΔR/R≤ ±(5%+0.1Ω)
Flame retardation JIS-C-5202 7-13-3-2
100% - 600% rated wattage load
US UL-94 flame retardation test V-0 grade noncombustible
REMARKS: 1. Resistance and resistance tolerance were tested in-house with micro resistance meter.
2. Coating refers to UL-certified data provided by supplier

Order Codes (DQ)

DQAN 1500W 100R K G
Part Number
DQA
DQB
DQAN
DQBN
Rated Power (W)
75W~2000W
30W~20000W
75W~2000W
30W~20000W
Resistance Value
0R1 0.1Ω
1R
10R 10Ω
12R 12Ω
100R 100Ω
Resistance Tolerance (%)
H ±3%
J ±5%
K ±10%
Assembly Method
N No mount.
C Clip mount.
G Horizontal mount.
Z Vertical mount.