Mold Military-Qualified Precision Resistors
(RN)Introduction (RN)
Military-qualified resistive precision resistors meet most demanding specifications.
Token (RN) series can be specified for all ultra precision electronics designs, as well as a complete selection of MIL-PRF-55182 and GJB244A-2001 quality standards.
Production is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a high grade ceramic body and conditioned to achieve the desired temperature stability.
Nickel plated steel terminations are firmly pressed on the metallised rods. A special laser is used to achieve the target value by smoothly cutting in the resistive layer without damaging the ceramics. A further conditioning is applied in order to stabilise the trimming result.
After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper are welded to the end-caps. The resistors are moulded into cylinder shape which provides electrical, mechanical, and climatic protection.
Products equate Vishay, Ohmite, Caddock, IRC, EBG, Panasonic Precision Devices with more competitive price and fast delivery. Commercial alternatives to military styles are available with higher power ratings. Detailed high precision (RN) specifications, both mechanical and electrical, can be download here (RN) Series PDF 331KB, or contact our sales representative for more information.
Production Standard :
Which is made referencing to Chinese National Quality Standard GJB244A-2001 standards, and USA Military/Established Reliability MIL-PRF-55182 in environmental and dimensional requirements.
Power Rating :
Power ratings are based on the following two conditions,
- ± 2.0 % maximum ΔR in 10 000 h load life.
- + 175 °C maximum operating temperature.
Applications :
- Industrial process control systems,
- Measuring and calibration equipment,
- Telecom, Precision Instruments, Avionics,
- Test and measurement, Medical electronics.
Features :
- Very low noise.
- Precision tight tolerances to B (±0.10%).
- Military/Established Reliability and stability.
- Wide resistance ranges from 10Ω to 5MΩ.
- Controlled temperature coefficient to E ( ±25 ppm/°C).
- Covers all general type precision resistive products.
- Lead (Pb)-free and RoHS compliant.
Dimensions & Technical Characteristics (RN)
|
||||||
TYPE | RN55 | RN60 | RN65 | RN70 | ||
Rated Wattage (W) | 70°C | 0.125 (1/8W) | 0.25 (1/4W) | 0.5 (1/2W) | 1W | |
125°C | 0.1 | 0.125 | 0.25 | 0.5 | ||
Max. Working Voltage (V) | 200 | 250 | 300 | 350 | ||
Dimensions (Unit: mm) | L ± 0.3 | 6.8 | 10.0 | 15.1 | 18.4 | |
D ± 0.4 | 2.5 | 3.8 | 5.2 | 6.5 | ||
A ± 0.05 | 0.60 | 0.60 | 0.60 | 0.80 | ||
MIL-Approved Resistance Range (Ω) | 10Ω ~ 3MΩ | 10Ω ~ 3MΩ | 10Ω ~ 3MΩ | 10Ω ~ 5MΩ | ||
AWG Wire No. | 22 | 22 | 22 | 20 | ||
Working Temperature Range | -55°C ~ +175°C | |||||
Nominal Resistance Tolerance | B(±0.10%), C(±0.25% ), D(±0.50%), F(±1.00%) | |||||
Temperature Coefficient | C3(±25PPM/°C), C2(±50PPM/°C), C1(±100PPM/°C) |
Remark: | 1. Temperature Coefficient PPM can be low to ±5PPM/°C, if applications only need operation in narrow precise |
Mechanical and Electrical Test Conditions (RN)
Type | Item | Method | Requirement |
Long Period | Life Time | GJB244A (MIL-PRF-55182) 4.8.18 Rated Wattage,125°C,2000h,10000h |
GJB244A (MIL-PRF-55182) 3.24 ΔR≤±(0.5%R+0.01Ω) ΔR≤±(2%R+0.01Ω) |
Humidity | GJB244A (MIL-PRF-55182) 4.8.18 -10°C ~ +65°C, RH<90% Rated Wattage, Cycle 240h. |
GJB244A (MIL-PRF-55182) 3.21 ΔR≤±(0.4%R+0.01Ω) |
|
High Temp. Exposed | GJB244A 4.8.19 175°C 2000h |
GJB244A (MIL-PRF-55182) 3.25 ΔR≤±(2.0%R+0.01Ω) |
|
Short Period | Dielectric Voltage | GJB244A (MIL-PRF-55182) 4.8.12/4.8.23/4.8.10 |
GJB244A (MIL-PRF-55182) 3.18/3.29/3.16 ΔR≤±(0.15%R+0.01Ω) no physical damage, arc, isolation break through |
Lead Strength, Impact, High Frequency Vibration |
GJB244A (MIL-PRF-55182) 4.8.11/4.8.16/4.8.17 |
GJB244A (MIL-PRF-55182) 3.17/3.22/3.23 ΔR≤±(0.20%R+0.01Ω) no physical damage |
|
Solderability | GJB244A (MIL-PRF-55182) 4.8.14 | GJB244A (MIL-PRF-55182) 3.20 ΔR≤±(0.10%R+0.01Ω) no physical damage |
Order Codes (RN)
RN65 | 0.5W | 10R | D | C2 | P | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | 2 | 3 | 4 | 5 | 6 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
More Information and Specification of Resistors in PDF download
Specification of Military-Qualified Resistive Precision Resistors (RN) PDF download (314KB).
Dip Metal Film, Wire Wound, Surface Mount Precision Resistors Series PDF download (1450KB).
Glossary of Resistor Terminology - Precision Resistors PDF Download (389KB).
Precision Resistor General information PDF Download (208KB).
Resistor Lead Forming and Dimensions PDF download (260KB).
Design Guide for Precision Resistors PDF Download (247KB).
Token Resistor Color Coding System PDF download (379KB).
Selecting The Optimum Resistors PDF download (234KB).
Common Resistor Terminology PDF download (315KB).
Resistor Precautions in Usage PDF download (301KB).
Typical RoHS Reflow Profile PDF download (303KB).
What is a Resistor PDF download (562KB).