Saw Filters
(TSF)Introduction (TSF)
Token Saw Filters (TSF) Make New Waves in The Wireless World. With the growth of wireless communications, surface acoustic wave technology filters have become a critical component for electronics manufacturers. Token develops and manufactures a complete line of our frequency control products utilizing industry standard packages in both Surface Mount and Through Hole designs.
Token provides innovative low-cost, space-saving and energy-efficient designs with high volume off-shore manufacturing, leading technology and superior engineering resources in design and process manufacturing.
Token's Saw filters support all the major standards: EGSM, DCS, AMPS/CDMA/GSM850, PCS, WCDMA, WLAN, GPS, within the standard range of devices, offering a cost-effective solution for all applications.
A new compact range of Saw RF filters uses chip-scale packaging specifically to address the demanding miniaturisation and performance requirements for new generations of mobile phones. Key features of the range include compatibility with lead-free (high-temperature) solder reflow while achieving high reliability against moisture, temperature, mechanical vibrations and shocks.
In modern remote control applications, Saw resonators and front end filters are key components which transmit in the USA typically at 315 or 915 MHz and in Europe at 433.92 MHz or 868-870 MHz. These remote controls are used in systems for Remote Keyless Entry (RKE, wireless operation of a car's central locking system), security alarms and garage door openers, electronic toll, RFID, short range data transmission, wireless Tire Pressure Monitoring (TPMS).
Token Saw components provide stable frequencies for the RF carrier signal to transmit data over a range for the local oscillators of superhet receivers. The front-end filter in the receiver eliminates interference from the incoming RF signal, thus increasing selectivity and sensitivity in short-range devices.
Our experienced engineering team can support your Saw application from the initial design through production. Custom designs are available utilizing high technology mask designs, wafer fabrication, assembly and complete reliability testing.
For marketing discontinuations or second sourcing activities concerning RF Filter and IF Filter products, you are encouraged to contact our Sales Department so the request can be properly directed within Token.
Front End Filter Typical Specification (TSF)
Part Number | Center Freq. (MHz) |
IL(dB) | 3dB BW(MHz) | Package | |
SMD Type | DIP Type | ||||
TSF295D00-D1 | 295 | 3.0 | 0.6 | TO-39 | |
TSF302D00A-S4 | 302 | 2.5 | 0.75 | QCC8C | |
TSF302D00B-S7 | 302 | 2.5 | 0.75 | DCC6 | |
TSF303D825A-D1 | 303.825 | 3.0 | 0.6 | TO-39 | |
TSF303D825B-S4 | 303.825 | 3.0 | 0.6 | QCC8C | |
TSF303D875A-D1 | 303.875 | 3.0 | 0.6 | TO-39 | |
TSF303D875B-S4 | 303.875 | 3.0 | 0.6 | QCC8C | |
TSF310D00-S4 | 310 | 3.0 | 0.8 | QCC8C | |
TSF315D00A-D1 | 315 | 3.0 | 0.6 | TO-39 | |
TSF315D00B-D2 | 315 | 3.0 | 0.6 | F-11 | |
TSF315D00C-S4 | 315 | 3.0 | 0.6 | QCC8C | |
TSF315D00D-S4 | 315 | 2.5 | 1.3 | QCC8C | |
TSF315D00E-S6 | 315 | 2.5 | 1.3 | QCC8B | |
TSF315D50-D1 | 315.5 | 3.0 | 0.6 | TO-39 | |
TSF318D00-D1 | 318 | 3.0 | 0.6 | TO-39 | |
TSF319D50-D1 | 319.5 | 2.5 | 0.7 | TO-39 | |
TSF345D00A-S6 | 345 | 2.5 | 4.5 | QCC8B | |
TSF345D00B-S4 | 345 | 3.0 | 0.9 | QCC8C | |
TSF372D50-D1 | 372.5 | 3.0 | 0.6 | TO-39 | |
TSF390D00-S4 | 390 | 3.0 | 1.0 | QCC8C | |
TSF391D25-D1 | 391.25 | 2.5 | 0.6 | TO-39 | |
TSF395D00-S4 | 395 | 3.0 | 1.0 | QCC8C | |
TSF401D65-S4 | 401.65 | 3.0 | 0.6 | QCC8C | |
TSF401D90-D1 | 401.9 | 3.0 | 0.6 | TO-39 | |
TSF418D00A-D1 | 418 | 3.0 | 0.6 | TO-39 | |
TSF418D00B-S4 | 418 | 3.0 | 0.6 | QCC8C | |
TSF419D20-S4 | 419.2 | 3.0 | 1.2 | QCC8C | |
TSF430D50A-D1 | 430.5 | 3.0 | 0.6 | TO-39 | |
TSF430D50B-D2 | 430.5 | 3.0 | 0.6 | F-11 | |
TSF431D50A-D2 | 431.5 | 2.5 | 0.58 | F-11 | |
TSF431D50B-S4 | 431.5 | 2.5 | 0.58 | QCC8C | |
TSF433D42A-S4 | 433.42 | 3.5 | 0.6 | QCC8C | |
TSF433D42B-S7 | 433.42 | 3.0 | 0.9 | DCC6 | |
TSF433D92A-D1 | 433.92 | 3.0 | 0.6 | TO-39 | |
TSF433D92B-D1 | 433.92 | 2.0 | 0.73 | TO-39 | |
TSF433D92C-D2 | 433.92 | 3.0 | 0.6 | F-11 | |
TSF433D92D-S4 | 433.92 | 3.0 | 0.6 | QCC8C | |
TSF433D92E-S4 | 433.92 | 2.0 | 0.73 | QCC8C | |
TSF433D92F-S4 | 433.92 | 2.5 | 0.6 | QCC8C | |
TSF433D92G-S4 | 433.92 | 2.5 | 0.95 | QCC8C | |
TSF433D92H-S4 | 433.92 | 2.2 | 0.7 | QCC8C | |
TSF433D92I-S6 | 433.92 | 2.8 | 6.0 | QCC8B | |
TSF433D92J-S6 | 433.92 | 2.3 | 0.56 | QCC8B | |
TSF433D92K-S6 | 433.92 | 2.3 | 0.56 | QCC8B | |
TSF433D92L-S9 | 433.92 | 2.8 | 1.0 | DCC6C | |
TSF433D92M-S7 | 433.92 | 2.3 | 0.56 | DCC6 | |
TSF434D42A-D1 | 434.42 | 3.0 | 0.7 | TO-39 | |
TSF434D42B-S4 | 434.42 | 3.0 | 0.6 | QCC8C | |
TSF439D25-D1 | 439.25 | 3.0 | 0.6 | TO-39 | |
TSF451D25-D1 | 451.25 | 2.5 | 0.48 | TO-39 | |
TSF463D912-S4 | 463.912 | 2.5 | 1.2 | QCC8C | |
TSF499D25-D1 | 499.25 | 3.0 | 0.54 | TO-39 | |
TSF801D125A-S7 | 801.125 | 5.8 | 0.56 | DCC6 | |
TSF801D125B-S6 | 801.125 | 5.0 | 0.58 | QCC8B | |
TSF859D15-D2 | 859.15 | 4.0 | 1.0 | F-11 | |
TSF868D00-S4 | 868 | 3.5 | 1.2 | QCC8C | |
TSF868D30-S4 | 868.3 | 4.0 | 1.2 | QCC8C | |
TSF868D35A-D2 | 868.35 | 4.0 | 1.2 | F-11 | |
TSF868D35B-S4 | 868.35 | 4.0 | 1.2 | QCC8C | |
TSF868D35C-S6 | 868.35 | 3.5 | 1.8 | QCC8B | |
TSF868D69-S4 | 868.69 | 3.8 | 1.9 | QCC8C | |
TSF868D95-S4 | 868.95 | 3.5 | 1.2 | QCC8C | |
TSF869D69-S4 | 869.69 | 3.8 | 1.8 | QCC8C | |
TSF902D30-S4 | 902.3 | 3.5 | 1.2 | QCC8C | |
TSF908D00-S6 | 908 | 3.0 | 2.0 | QCC8B | |
TSF914D50-D2 | 914.5 | 3.8 | 1.2 | F-11 | |
TSF915D00A-D1 | 915 | 3.5 | 1.2 | TO-39 | |
TSF915D00B-S4 | 915 | 4.0 | 1.2 | QCC8C | |
TSF915D00C-S7 | 915 | 3.8 | 1.8 | DCC6 | |
TSF916D50A-D1 | 916.5 | 4.0 | 1.2 | TO-39 | |
TSF916D50B-D2 | 916.5 | 3.5 | 1.2 | F-11 | |
TSF916D50C-S4 | 916.5 | 4.0 | 1.2 | QCC8C | |
TSF916D50E-S4 | 916.5 | 4.0 | 1.2 | QCC8C | |
TSF916D50F-S6 | 916.5 | 4.8 | 1.35 | QCC8B | |
TSF921D60-S6 | 921.6 | 2.6 | 1.9 | QCC8B | |
TSF927D20-S7 | 927.2 | 3.0 | 1.45 | DCC6 | |
TSF931D00-S4 | 931 | 3.5 | 1.8 | QCC8C |
Front end filters for Automotive Electronics and Remote Control:
- 433.92 MHz in Europe.
- 315 MHz or 915 MHz in the USA.
- 868-870 MHz In modern remote control applications.
Satellite Receiver Typical Specification (TSF)
Part Number | Center Freq. (MHz) |
IL(dB) | 3dB BW(MHz) | Application | Package | |
SMD Type | DIP Type | |||||
TSF480D00A-D5 | 480 | 21 | 18 | One-channel, Satellite Filters | TO39-2 | |
TSF480D00B-S4 | 480 | 21 | 18 | One-channel, Satellite Filters | QCC8C | |
TSF480D00C-D5 | 480 | 22.5 | 27 | One-channel, Satellite Filters | TO39-2 | |
TSF480D00D-S4 | 480 | 22.5 | 27 | One-channel, Satellite Filters | QCC8C | |
TSF480D00E-D5 | 480 | 20 | 27 | One-channel, Satellite Filters | TO39-2 | |
TSF480D00F-D5 | 480 | 21 | 36 | One-channel, Satellite Filters | TO39-2 | |
TSF480D00G-S4 | 480 | 21 | 36 | One-channel, Satellite Filters | QCC8C | |
TSF480D00H-D1 | 480 | 15 | 16 | One-channel, Satellite Filters | TO-39 | |
TSF480D00I-S4 | 480 | 12.5 | 15.3 | One-channel, Satellite Filters | QCC8C | |
TSF480D00J-D5 | 480 | 22 | 38.6 | One-channel, Satellite Filters | TO39-2 | |
TSF479D50A-D5 | 479.5 | 21.5 | 8 | One-channel, Satellite Filters | TO39-2 | |
TSF479D50B-S4 | 479.5 | 21.5 | 8 | One-channel, Satellite Filters | QCC8C | |
TSF479D50C-D5 | 479.5 | 18 | 6.5 | One-channel, Satellite Filters | TO39-2 | |
TSF479D50D-D2 | 479.5 | 22 | 16 (5.5 dB) | One-channel, Satellite Filters | F-11 | |
TSF479D50E-S4 | 479.5 | 22 | 16 (5.5 dB) | One-channel, Satellite Filters | QCC8C | |
TSF402D78B-S4 | 402.78 | 20.5 / 20.0 | 15.5 / 28.0 | Two-channel, Satellite Filters | QCC8C |
Filters for Digital Satellite Broadcasting (DSB Receiver):
- Superior sound and picture quality.
- More available channels to choose from.
- Progressively digitized worldwide of Television and radio broadcasting.
RF Filters for GPS Typical Specification (TSF) Mobile Communications
Part Number | Center Freq. (MHz) |
BW(MHz) | IL(dB) | Package | |
SMD Type | DIP Type | ||||
TSF1542D50-S9 | 1542.50 | 40 | 3.5 | DCC6C | |
TSF1575D42A-S9 | 1575.42 | 2.4 | 1.6 | DCC6C | |
TSF1575D42B-S6 | 1575.42 | 2.4 | 1.6 | QCC8B |
IF Filters for Wireless LAN Typical Specification (TSF) Mobile Communications
Part Number | Center Freq. (MHz) |
3dB BW(MHz) | IL(dB) | Package | |
SMD Type | DIP Type | ||||
TSF280D00-S4 | 280 | 20 | 11 | QCC8C | |
TSF374D00A-D1 | 374 | 22 | 9 | TO-39 | |
TSF374D00B-D1 | 374 | 22 | 8.5 | TO-39 | |
TSF374D00C-S4 | 374 | 22 | 9 | QCC8C | |
TSF374D00D-S4 | 374 | 22 | 8.5 | QCC8C | |
TSF374D00E-S4 | 374 | 19 | 9 | QCC8C | |
TSF374D00F-S4 | 374 | 20.5 | 9 | QCC8C | |
TSF374D00G-S6 | 374 | 23 | 9 | QCC8B | |
TSF374D00H-S6 | 374 | 21 | 9 | QCC8B |
RF & IF Filters Applications (TSF)
Saw RF Filters (Front End Filters)
- The main key factor of insertion loss on system performance criticizes the application of resonant design principles such as LCRF (Longitudinally-Coupled Resonator Filter), IEF (Impedance Element Filter), and IEF balanced bridge filters.
With many year's experience in Saw applications, Token takes advantages of these design principles for the development of low loss filters for front end applications.
- A combination of two port resonators can be described as an LCRF design. Typically, a parallel connection of 4 two port resonators is used.
This advantage allows very low loss by reducing resistive losses and avoided waveguide effects.
- IEF composes the basic design principle for RF filters with one port resonators used as impedance elements. Resonators are constituted in a ladder configuration.
The difference between the acoustic impedance of resonance and anti-resonance is used to achieved a filter performance.
The resonators may be designed to have different resonant frequencies.
- For wide-band, low-loss filters, Token takes advantage of different cuts of higher coupling substate material (LiNbO3 / LiTaO3).
Saw IF Filters
- There are various different design principles which are suitable for the design of saw IF Filters. However, to meet the requirements perfectly is working on optimization.
- Precision filter design meets most of the requirements such as phase ripple, group delay and low amplitude in combination with high close-in rejection and fabulous selectivity.
The disadvantage of precision filters is their high insertion loss. Token Saw Resonator design makes low insertion loss and miniaturized package size served better.
- SPUDT (Single Phase Unidirectional Transducer) filters combine transversal and resonant filter design principles to take advantage of optimization both.
By optimizing the transduction and reflection of interdigital transducers, the filter performance can be improved while keeping the chip size the same.
As a result of internal reflections, the signal length in the time domain is increased.
- Token utilizes SFIT(Slanted Finger Interdigital Transducer) filter to provide a low insertion loss with a wide bandwith in Saw design. Token has developed a set of practical design tools to achieve low group delay ripple, and suppression of reflections including the triple transit signal.
Order Codes (TSF)
TSF | 302D00 | A | S1 | |||||||||||||||||||||
1 | 2 | 3 | 4 | |||||||||||||||||||||
|
|
|
|
IF / RF Saw Filters (TSF) PDF download
Solutions for Wireless Communication IF / RF Saw Filters (TSF) Series PDF download (456KB).
Saw Filters & Saw Resonators All Series material PDF download (796KB).
SAW Filters & Resonators Package Dimensions PDF download (318KB).
General Information Of SAW Filters & Resonators PDF download (261KB).
What Is Saw Devices PDF download (340KB).
Telecommunications & Applications Of Saw Devices PDF download (293KB).
Design Notice & Technology Of Resonators & Filters PDF download (423KB).
Typical RoHS Reflow Profile PDF download (287KB).
About What Is a Piezo - Ceramic Information PDF download (479KB).
Redial Taping Dimensions Of Ceramic Resonator & Filter PDF download (407KB).
Resonators & Filters Terminology PDF download (491KB).
Piezo Dielectric Microwave Devices Precaution Usage PDF download (393KB).