INDUCTORS & COILS

Through Hole Inductors

Token Electronics specializes in standard and custom solutions Inductor for your power design.

  • TCAL | PDF (425KB) - Inductance (μH): 0.47 ~ 51000, (TCAL) Meet The Needs of A Variety of Manufacturing Methods
  • TCUU | PDF (499KB) - Inductance (μH): 0.47 ~51000, EMI Line Filters for Filtering Common Mode Power Line Noise
  • TCWB | PDF (346KB) - Inductance (μH): - , Excellent EMI Suppression Capability Inductor Filter Wide Band Chokes
  • TCDA | PDF (449KB) - Inductance (μH): 0.15 ~ 4.7, Technology of Diagonal Through Hole Power Inductor Design
  • TCRB | PDF (402KB) - Inductance (μH): 10.00 ~ 47000, Open Magnetic Construction Design Makes Better TCR
  • TCRC | PDF (413KB) - Inductance (μH): 10.00 ~ 47000, Limit The Alternating Current Through The Choke Coils
  • TCRS | PDF (383KB) - Inductance (μH): 22.00 ~ 10000, Shielded Construction Design for Higher Frequency
  • TC19 | PDF (322KB) - Inductance (μH): 19.5, Through Hole Gap Toroidal Coils Make Your Design Cost-Effective
  • TCTK | PDF (334KB) - Inductance (μH): Custom, Toroidal Inductors with Closed Magnetic Circuit for Lowest EMI
  • TCAC | PDF (367KB) - Inductance (μH): Custom, Token Will Do Any Custom Coil Windings of Air Coils for You
  • TCTC | PDF (365KB) - Inductance (μH): 33 ~ 140, Low Loss Powdered Iron Cores, Low EMI Toroidal Coils
  • TCFB | PDF (327KB) - Inductance (μH): - , Ferrite Beads Filter Radio Frequency Interference and Noise
  • TCPC | PDF (307KB) - Inductance (μH): - , Choke Coils Lot of Dimensions to Choose
  • TCB7T | PDF (369KB) - Inductance (μH): Custom, Common Mode Inductor Chokes Clean Up High-Speed Signals
  • TC1213 | PDF (345KB) - Inductance (μH): 0.68 ~ 1.00, Token Develops High-Efficiency Coiled Power Inductors
  • TCLP/TCVP | PDF (359KB) - Inductance (μH): 150 ~ 1000, high-current & High Saturation Flux Density Compact Size

Download Entire Toroidal Inductor, Common Mode Chokes, and Choke Coils Catalogue PDF (1.32MB).

SMD RF Inductors

New RF inductors designed for high-current high-temperature applications in rugged environments.

  • TRAD | PDF (345KB) - Inductance (μH): Custom, Token Will Wind Any Air Core Inductors for You (TRAD)
  • TRAL | PDF (422KB) - Inductance (μH): 0.001~0.10, Thin Film Chip Inductors Provide Small-Format Protection
  • TRAM | PDF (368KB) - Inductance (μH): 0.00165~0.538, The Smallest Air Coil Inductors for Only (1.8x2.0x2.0 mm)
  • TRWL | PDF (608KB) - Inductance (μH): 0.002~15.00, Wirewound Ceramic Inductor Simplifies Power Management
  • TRCM | PDF (386KB) - Inductance (μH): 0.10~1000.00, Wirewound inductors Go To Extremes Superior Performance
  • TREC | PDF (358KB) - Inductance (μH): 1.00~330.00, Chip Narrow Pad Inductor with High Current for RF Applications
  • TREM | PDF (390KB) - Inductance (μH): 0.10~1000.00, SMD Narrow Pad Inductor with High SRFs for RF Applications
  • TRMF | PDF (724KB) - Inductance (μH): 0.0012~10.00, Ceramic Multilayer Inductor for High-Frequency Applications
  • TRMA | PDF (419KB) - DCR (Ω): 0.03~1.00, High Current Multilayer Ferrite Beads Lower DCR and Handle Up to 6A
  • TRMB | PDF (477KB) - DCR (Ω): 0.03~1.00, Token Chip Multilayer Bead Offers High Impedance Up To 2700Ω
  • TRMI | PDF (407KB) - Inductance (μH): 0.0012~10.00, New Options in Chip Multilayer Ferrite Inductor
  • TR4308I | PDF (395KB) - Inductance (mH): 0.40~8.10, Transponder Coils is The Key of RFID System

Download Entire Thin Film Chip Inductor, Multilayer Ferrite Beads, Air Coil, Ceramic Inductors Catalogue PDF (1.83MB).

SMT Power Inductors

Token SMT Shielded/Unshielded Power inductors suit cost-critical applications offering a major boost in performance.

  • TPSDBL | PDF (356KB) - Inductance (μH): 100.00~10000.00, With High Breakdown Voltage For Back light Applications
  • TPSPA | PDF (425KB) - Inductance (μH): 0.10~4.70, Enhances Low DCR High Saturation Current With High Frequency
  • TPSME | PDF (453KB) - Inductance (μH): 1~100, Miniature Low Profile Inductor For New Generation Portable Products
  • TPSRH | PDF (385KB) - Inductance (μH): 1.20~1000.00, Shielded Inductor Family Series Expand Power Applications
  • TPSRB | PDF (383KB) - Inductance (μH): 10.00~470.00, Shielded Inductor Packs More Power In Less Board Space
  • TPSDS | PDF (439KB) - Inductance (μH): 1.10~680.00, Packs Low DCR, Low Profile, High Current All in One
  • TPSLF | PDF (390KB) - Inductance (μH): 1.20~1500.00, Shielded (TPSLF) Offers 0.005Ω Low DCR Value
  • TPSDC | PDF (395KB) - Inductance (μH): 1.00~10000.00, Surface Mount Power Inductor Low DCR
  • TPSH | PDF (498KB) - Inductance (μH): 1.00~1000.00, Low Profile Fit Into To More Protable Applications
  • TPUA | PDF (495KB) - Inductance (μH): 1.00~1000.00, Electrode with Ferrite Core for High Mounting Density
  • TPUDF | PDF (357KB) - Inductance (μH): 1.00~1000.00, Unshielded (TPUDF) Provide Full Range Inductance
  • TPUD | PDF (419KB) - Inductance (μH): 1.00~10000.00, SMT Unshielded Inductor Compact Low Profile to 0.8 mm
  • TPULF | PDF (382KB) - Inductance (μH): 1.00~1000.00, Unshielded SMT Power Inductor Cuts Down On Resistance
  • TPUTX | PDF (358KB) - Inductance (μH): 100.00~10000.00, Compact Power Toroidal Inductor Bursting With Energy
  • TPUDHP | PDF (354KB) - Inductance (μH): 0.33~47.00, Wire-Wound Technology Enabling Up to 30A High Current

Download Entire High Current Inductor, Wirewound Inductor, Back light Inductor Catalogue PDF (2.29MB).

SMD Balun Transformers

SMD Balun Transformers Conform to the RoHS Directives and Target Compact Power-Conscious Designs.

Download Entire SMD Common Mode EMI Filters Catalogue PDF (629KB).

RESONATORS & FILTERS

Saw Components

Token SAW selection aids RF/IF design, To give the design engineer maximum assistance with new product design.

  • TSF | PDF (400KB) - Frequency (MHz): 35.42 ~ 1855, Saw Filters Make New Waves in The Wireless World
  • TSR | PDF(400KB) - Frequency (MHz): 224.5 ~ 1090, Saw Resonators Replace LC Elements and Quartz Crystals

Download Entire Saw RF/IF Filters, Saw Resonators Catalogue PDF (795KB).

Microwave Components

Token Dielectric Microwave is designed for high-reliability cost-critical applications, suiting both satellite and microwave communications systems.

  • DF | PDF (318KB) - Frequency Range: 457M~5800MHz, Dielectric RF Bandpass Filters for Telecoms Applications
  • DR | PDF (327KB) - Frequency Range: 400M~5000MHz, Dielectric Coaxial Resonator for RF Communications
  • TE | PDF (366KB) - Frequency Range: 2G~16GHz, Dielectric Material The Future Communications Technology
  • DA | PDF (347KB) - Frequency Range: 1575M~2492MHz, Dielectric Patch Antenna is made for GPS,W-LAN, Comms

Download Entire Dielectric Resonator, Dielectric Antenna, Dielectric Bandpass Filters Catalogue PDF (796KB).

Ceramic Crystal Resonators

Token Ceramic Crystal Resonator, frequency sources for millimetre wave applications.

  • TACA | PDF (390KB) - Frequency Range: 7.600M~40.000MHz, Ceramic Package Surface Mount Crystal Resonator

Download Entire Quartz Crystals Catalogue PDF (418KB).

Discriminator Filters

The discriminator functions to convert the change of the frequency into audio frequency for FM/Communication

  • JT10.7M | PDF (320KB) - Frequency Range: 10.7 MHz, for FM (Murata Discriminator CDA 10.7 Compatible)
  • JTCV10.7M | PDF (320KB) - Frequency Range: 10.7 MHz, Low Power Processor Chip Ceramic Discriminator for FM
  • JTC | PDF (281KB) - Frequency Range: 455 KHz, Discriminator for Communication (Murata CDBC Compatible)
  • JTM | PDF (271KB) - Frequency Range: 455 KHz, (Murata CDB/CDBC/CDBM Discriminator for Communication)

Download Entire Catalogue PDF (796KB).

Ceramic Resonator

Optimum Selection of Ceramic Resonator (MHz) / (KHz).

  • ZTA | PDF (383KB) - Frequency Range (MHz): 1.79~60.00, MHz is Compatible to Murata Resonator CSA series
  • ZTT | PDF (380KB) - Frequency Range (MHz): 1.79~60.00, Resonator Built-in Capacitor (Murata CST Compatible)
  • ZTAC | PDF (428KB) - Frequency Range (MHz): 1.79~50.00, (Murata SMD Resonator CSAC Compatible)
  • ZTTC | PDF (428KB) - Frequency Range (MHz): 1.79~50.00, Chip Resonator Built-in Capacitor (Murata CSTC)
  • ZTB | PDF (371KB) - Frequency Range (kHz): 190~1250, Oscillating Circuits Requiring no Adjustment (Murata CSB)
  • ZTBY | PDF (370KB) - Frequency Range (kHz): 375~1250, Surface Mountable Formed Leads (Murata CSBF)
  • ZTB456 | PDF (334KB) - Frequency Range (kHz): 456, Provide Frequency Modulation for HI-FI Stereo Application
  • ZTB500/503 | PDF (334KB) - Frequency Range (kHz): 500/503, Is Designed for TV Horizontal Synthesizer Circuits
  • ZTB912F | PDF (334KB) - Frequency Range (kHz): 912F, Multiplexers for HI-FI Automobile Stereo Application

Download Entire Catalogue PDF (661KB).

Ceramic Filters

Ceramic Filter For AM/FM TV/VCR Communication

  • LTA | PDF (338KB) - Frequency Range: 450~470 KHz, Filter for Standard Radio Cassette Recorder Requirements
  • LTB | PDF (339KB) - Frequency Range: 450~470 KHz, Perfect Filter for Shrinking Mobile Communication Products
  • LTZ | PDF (280KB) - Frequency Range: 450~470 KHz, Low Cost Standard AM Filters (Murata SFZ Compatible)
  • LTP | PDF (319KB) - Frequency Range: 450~470 KHz, for AM are Compatible Murata Filter SFU450/455kHz
  • MLT | PDF (283KB) - Frequency Range: 450~470 KHz, Recommendable Intermediate Filter for AM (Murata PFB)
  • LZU | PDF (274KB) - Frequency Range: 450 KHz, Search-Stop Signal Detection Filter (Murata BFULA Compatible)
  • LTC | PDF (324KB) - Frequency Range: 455/450 KHz, Surface Mount IF Communication Filter (Murata CFUCG)
  • LT455 | PDF (323KB) - Frequency Range: 455/450 KHz, Selective Communication Filter (Murata CF, SF) for G.D.T.
  • LTM | PDF (291KB) - Frequency Range: 455/450 KHz, Ultra-miniature Versions Ceramic Filter (Murata CFUM/WM)
  • LTCS10.7M | PDF (318KB) - Frequency Range: 10.7 MHz, Low Profile (Chip Murata Ceramic Filter SFECS10M7)
  • LTCA/CV | PDF (326KB) - Frequency Range: 10.7 MHz, Low Profile 1.5±0.2mm (Murata Chip Filter SFECV10M7)
  • LT10.7M | PDF (354KB) - Frequency Range: 10.7 MHz, Filter for FM Receiver, Low Loss, Wide/Narrow Bandwidth
  • LT MB | PDF (318KB) - Frequency Range: 4.5~6.5 MHz, for TV/VCR Stage (Murata Filter SFE MB Compatible)
  • LTT MA | PDF (301KB) - Frequency Range: 4.5~6.74 MHz, High-Selectivity Filter for TV/VCR Stage (Murata SFT)
  • LTS | PDF (300KB) - Frequency Range: 4.5~6.5 MHz, Suitable for Multiplex Sound TV in America (Murata SFSH)

Download Entire Catalogue PDF (925KB).

Trap Filters

Token Ceramic Trap Filter is optimised for the performance requirements for TV/VCR Stage.

  • XT MB | PDF (317KB) - Frequency Range (MHz): 4.5~6.5, for TV/VCR Stage (Murata Trap TPS MB Compatible)
  • XT MW | PDF (293KB) - Frequency Range (MHz): 4.5~6.5, (Murata Double Trap Filter TPWA Compatible)
  • XT MT | PDF (293KB) - Frequency Range (MHz): 4.5~6.5, (Murata Triple Trap TPT Compatible)
  • XT MJ | PDF (291KB) - Frequency Range (MHz): 3.58~6.5, Filters for Chrominance Carrier (Murata Trap TPS MJ)

Download Entire Catalogue PDF (925KB).

RESISTORS

High Voltage Resistors

Ceramic Resistor - Serpentine Pattern Glaze Glass Film Resistor - Hi-Meg Hermetic Resistor

  • RI80 | PDF (471KB) - Working Voltage: 10KV ~ 35KV, Glaze Glass Film, Serpentine Pattern Design
  • RY31A | PDF (297KB) - Working Voltage: 3.2KV ~ 12.5KV, A Perfect Choice for High Frequency Circuit Designs
  • RI82 | PDF (372KB) - Working Voltage: 2KV ~ 30KV, Thick-Film, for Voltage Trend in Power Impulse Products
  • RH1 | PDF (319KB) - Resistance Range: 107Ω ~ 1012Ω, Hermetic Lead to a High Ohmic Resistance Values
  • RMCC | PDF (367KB) - Resistance Range: 470Ω ~ 105Ω, Allows Energy and Power to be Uniformly Distributed
  • RMCD | PDF (331KB) - Working Voltage: 15KV ~ 75KV, Higher Energy Power Dissipation & Higher Voltage Withstand
  • RMCA/CB | PDF (357KB) - Resistance Range: 470Ω ~ 105Ω, Non-Inductance for High Voltage Ignition Applications

Download Catalogue Ceramic Resistors, Hi-Meg Hermetic Resistors PDF (951KB).

Industry Wire-Wound Resistors

Industry Wire-Wound & Adjustable Power Resistors

  • BS | PDF (341KB) - Wattage: 150W ~ 2000W, One-of-A-Kind Enclosure to Hundreds of Applications
  • VR | PDF (353KB) - Wattage: 25W ~ 100W, Rheostat, Variable Resistors Control The Speed of a Motor
  • CB | PDF (307KB) - Wattage: Custom, Token's Power Modules Simplify Your Power Chamber Design
  • BX | PDF (342KB) - Wattage: 200W ~ 4800W, (BOX) Quick Build Dynamic Braking Resistors and Enclosures
  • ST | PDF (348KB) - Wattage: 500W ~ 1000W, High Power Starter for Application Loads In Brief Current Surges
  • ZR | PDF (382KB) - Wattage: 40W ~ 450W, When Space is Limited, Choose Token's "Thin" Stackable Resistor
  • DR | PDF (411KB) - Wattage: 10W ~ 20000W, The Best Cost-Effective Power Resistor for High Energy Applications
  • DRS | PDF (393KB) - Wattage: 15W ~ 20000W, for Applications Requiring Settings at Different Resistance Values
  • AL | PDF (372KB) - Wattage: 60W ~ 1500W, Power Low Profile Aluminum Encased Resistors
  • AH | PDF (425KB) - Wattage: 5W ~ 250W, Outstanding Power Heatsink Aluminum Housed Resistor
  • AHL | PDF (393KB) - Wattage: 5W ~ 250W, Reach Unreachable Points and Simplify Your PCB Design (AHL)
  • DQ | PDF (430KB) - Wattage: 30W ~ 20000W, Wave-Shape Ribbon-Wound Design Neutralize Inductance Parasitoid
  • DQS | PDF (345KB) - Wattage: 75W ~ 20000W, High-Precision Adjustment Power for High Energy Dissipation
  • DOE | PDF (312KB) - Wattage: 550W ~ 3250W, The Choice When Conditions Demand Top-Notch Performance

Download Catalogue Industry Wirewound & Adjustable Power Resistors PDF (1.63MB).

Ultra Precision Resistors

Enhanced Precision and Stability for Low-Cost Uses & Fast Approach to A Steady State

  • RJ | PDF (333KB) - Tolerance: 0.05% ~ 5.00%, Precision Metal-Film Resistor for Low-Cost Uses
  • EE | PDF (316KB) - Tolerance: 0.02% ~ 1.00%, Metal Film Resistor Offers More Precision Design Options
  • NE | PDF (318KB) - Tolerance: 0.05% ~ 5.00%, Mould, Token Advanced Film (NE) Spell High Precision
  • RE | PDF (322KB) - Tolerance: 0.02% ~ 1.00%, Token Ultra Precision Resistor Ten-Times More Accurate
  • RN | PDF (331KB) - Tolerance: 0.10% ~ 1.00%, Military/Established Resistors Meet Most Demanding Specs
  • UAR | PDF (319KB) - Tolerance: 0.02% ~ 1.00%, Mould Metal Thin Film Resistors Define Precision
  • UPR | PDF (364KB) - Tolerance: 0.01% ~ 0.10%, Radial Ultra Precision Networks have more options (UPR)
  • UPSC | PDF (343KB) - Tolerance: 0.01% ~ 0.10%, Ultra Precision Networks Take Accuracy Pole Position
  • UPRND | PDF (340KB) - Tolerance: 0.01% ~ 0.10%, High Precision Networks Sharpen The Edge of Application Accuracy
  • UPRNS | PDF (321KB) - Tolerance: 0.01% ~ 0.10%, Serial Dip, High Accuracy Networks Save on Resistors (UPRNS)

Download Precision, Resistor Network Divider Catalogue PDF (1.44MB).

Current Sense Resistors

Low Ohmic Current Sensing Resistors Minimise Power Consumption

  • CS | PDF (423KB) - Resistance (Ω): 0.001 ~ 8, (CS) SMD Current Detecting Resistors Save Space and Weight.
  • FL | PDF (466KB) - Resistance (Ω): 0.002 ~ 0.05, Current Shunt Resistors for high-current applications.
  • BWL | PDF (295KB) - Resistance (Ω): 0.005 ~ 5, Lowest Ohmic Value Resistor (BWL) Minimise Power Consumption.
  • LRA | PDF (367KB) - Resistance (Ω): 0.003 ~ 0.1, Low Ohmic Open-Air Resistors Feature Longer Thermal Path.
  • TCS | PDF (416KB) - Resistance (Ω): 0.05 ~ 1, (TCS) Surface Mount Resistors Make Sense of Current.
  • LRB | PDF (383KB) - Resistance (Ω): 0.002 ~ 0.05, Token's Open Air Resistor is Alternative Shunts (LRB).
  • LRC | PDF (415KB) - Resistance (Ω): 0.0025 ~ 0.02, Ultra Low Ohm Resistor Save Space, Time, and Money (LRC).
  • LRD | PDF (393KB) - Resistance (Ω): 0.001 ~ 1, Token's Four-terminal resistors tackle current sensing applications.
  • LSQ | PDF (414KB) - Resistance (Ω): 0.01 ~ 0.1, Kelvin Four-Lead Resistors handle high-wattage applications.
  • LPS | PDF (431KB) - Resistance (Ω): 0.002 ~ 0.05, Token LPS Offers a variety of possibilities for shunt-resistors.
  • OAR | PDF (368KB) - Resistance (Ω): 0.005 ~ 0.05, Tight pitch version of metal element current sense resistor.

Download Entire Low Ohmic Resistor, Shunt Resistors Catalogue PDF (1.25MB).

Commercial Resistors

Low Power General Purpose Commercial Resistors

  • CF | PDF (335KB) - Wattage: 1/8W ~ 3W, Carbon Film Resistors are Cost-Effective Option
  • MF | PDF (343KB) - Wattage: 1/8W ~ 3W, Precision Metal-Film Resistors for Low-Cost Uses
  • SQ | PDF (359KB) - Wattage: 2W ~ 25W, Thermal Dissipation Ceramic Housed Cement Resistor
  • RCR | PDF (333KB) - Wattage: 1/2W ~ 1W, Thick-Film Handles Large Surges & Discharge Path Voltage Load
  • CCR | PDF (344KB) - Wattage: 1/2W ~ 1/4W, Carbon Composition Resistors Handle Big Peaks and Pulses
  • PGM | PDF (437KB) - Wattage: 90mW ~ 500mW, CDS Light-Dependent Photoresistors for Sensor Applications
  • FRN | PDF (366KB) - Wattage: 1/4W ~ 3W, Metal Film Fusible Resistor Features Best of Both Worlds
  • FKN | PDF (366KB) - Wattage: 1W ~ 6W, Wirewound for Special Pulse Energy and Fusing Requirements
  • FSQ | PDF (366KB) - Wattage: 2W ~ 10W, Cement Resistor for Thermal Dissipation and Fusing Requirements
  • FKU, FRU | PDF (338KB) - Wattage: 0.8W ~ 3.5W, Ultimate Protection Thermal Cutoffs for High Power Applications
  • RSS, RSN | PDF (346KB) - Wattage: 1/4W ~ 10W, The Pulse in Various Forming Styles for Different Applications
  • BWW | PDF (310KB) - Wattage: 1/2W ~ 10W, Precision Power Resistors Operate in Harsh Environments
  • KNP | PDF (404KB) - Wattage: 1/2W ~ 12.5W, Wirewound Resistor is Getting Economical Solution for Population
  • KNPN | PDF (379KB) - Wattage: 1/2W ~ 6W, Non-inductive Resistor is Suitable for High Frequency Applications
  • KNP-R | PDF (342KB) - Wattage: 0.4W ~ 13W, Wirewound Resistors Boast Consistent Precision Power Operation
  • KNP-VE | PDF (295KB) - Wattage: 2.5W ~ 12W, Vitreous Enamel Coated Power Wirewound High Energy Resistors
  • ZO & JW | PDF (341KB) - Wattage: 1/8W ~ 1/4W, Zero-ohm & jumpers offer flexible board routing

Download Fusible Resistor, Metal Oxide resistors, Cement Resistors Catalogue PDF (1.14MB).

TO-Style Resistors

TO-220, TO-247 Power-Film Heat Sink Mountable Resistors

Download Catalogue TO-220, TO-247 Power-Film Heat Sink Mountable Resistors PDF (599KB).

Melf Resistors

Melf is the abbreviation of "Metal Electrode Leadless Face", a cylindrically shaped resistor designed for surface mounting.

  • RFM | PDF (315KB) - Non-Inductance MELF Offer Greater Choice for High Frequency Applications
  • RGM | PDF (329KB) - Pulse Load MELF (RGM) Provides Maximum Thermal Compliance
  • RDM | PDF (288KB) - Token Carbon Film MELF (RDM) is The Cost-Effective Option
  • RJM | PDF (314KB) - Metal-Film Melf (RJM) Offer More Design Options

Download Catalogue And Datasheet PDF (564KB).

Chip Resistors

Surface mounted SMD resistors are available in industry standard 0201, 0402, 0603, 0805, 1206, 1210, 2010, to 2512 sizes

  • FCR, RCA, RCN | PDF (377KB) - Thick Film, Pulse Withstanding Flip Chips, Resistor Chip Array, Resistor Networks
  • AR | PDF (442KB) - Thin-Film Chips (AR) Take Precision Pole Position & Add Powerful New Options
  • PR | PDF (420KB) - Moisture-Proof (PR) Anti-Corrosive Chips for High Humidity Precision Applications
  • PWR | PDF (430KB) - Token (PWR) Pulse Withstanding Chips Provide 50% Increase in Power Dissipation
  • HVR | PDF (423KB) - Token's new (HVR) High-voltage chip resistors deliver power ratings up to 4 KV

Download Surface Mount Resistor Catalogue PDF (1.38MB).

CUSTOM DESIGNS

Heating Resistors

The introduction of new materials and new technologies produced a new generation of high-temperature Heating Resistor.

  • HR | PDF (359KB) - Token Ceramic Thermal Far Infrared Heat Resistors (HR) with Customized Design

Voltage Tubular Resistors

Providing design engineers with high quality, high power, high voltage dividers for use in sophisticated system.

  • RI85 | PDF (434KB) - High Voltage Resistors Break Through 800 Wattage in High Power Applications

Network Resistors

Advanced film resistor technology provides the performance characteristics required by the precision input signal circuits.

  • NTK | PDF (292KB) - Token (NTK) High Voltage Network Dividers Can Be Customised to Order